No problem.....
You will need CDMA Workshop and QPST for this...
Please search,, they are easy to find...
I will not go into the exacts of getting your spc/msl and flashing the prl to the phone.. if you are not sure how to do this,, you shouldnt really be reading this thread yet...
After Changing your spc to 000000
and flashing the Cricket prl to the phone...
do the esn change through cricket..
perform *228 and get all things updated...
after this go back to Qpst and read the phone..
once you read the phone.. go to m.ip and change from mobile ip to simple ip only,,, and look at the first 2 user profiles under m.ip open each one up and change the Nai to
10DigitNumber@mycricket.com,, for both standard and tethered...
remove any ip address that you find in these 2 profiles. and remove any other profiles except the first 2.
also make sure both of them say enabled...,,
now go to ppp config...
look at the tabs that say um and an... under these 2 tabs,, the user id should be
10DigitNumber@Mycricket.com tethered id should be the same,, password is cricket in lowercase on both tabs,, remove any dns ip address you find in either tab also. just make sure all ip address are blank.
once you are completed with this,, move on to the next step..
click on phone icon
click on dialer..
enter ##3282#
click user name
click edit
enter your spc which should already be 000000 by now
starting from the top here ya go...
User Name "10DigitNumber@mycricket.com"
SPI MN-HA "1234"
SPI MN-AAA "1234"
M Home Address "066.179.166.148"
Prim Ha Ip "010.000.005.021"
Sec Ha Ip "010.000.005.022"
Rev Tunneling "Off"
AAA Password "cricket"
HA Password "cricket"
click done,, allow the phone to reboot...
Now do ##3282# again.. this time go to browser
click edit
enter spc
youll see gateway1 and gateway2,,, under both of these
you will see primary and secondary,,, set primary and secondary ip`s for both gateways to 172.029.223.007,, they will all be the same ip address,, and set the Port and secure Port for all gatways to 8080,, hit done reboot and padow.. there you go...
I have tried to make this as clear As I can,, If you have any issues,, start all over... and start from the top...
oh ,, and if you ever reset the phone.. not only will you lose these settings.. but you will lose the browser registration,, and after that the browser will not come up again,, because it gets stuck trying to re register your account with sprint..
this happened to me,, and I got the browser back,, but dont remember how I did it,, I think I had to get into the policy file or something,, but oh well dont sweat it,, just dont reset the phone back to factory spect.. it makes all the apps think the phone is brand new and never been activated..